Eindhoven Airport: follow ECRA ground procedures for transponder/ADS‑B use from pushback/taxi until parked and manage TCAS per instructions.

A0574/26

EST

Checking status...

OpsFlight Procedures

2026-03-03 10:05 - 2026-06-03 12:00

Duration:LONG4 months EST

Period of Applicability

2026-03-03 10:05 - 2026-06-03 12:00

Timeline Visualization

Get instant access to visual timeline analysis and NOTAM scheduling information with Notamify Pro.

7 days free trial, then $24.9/month. Cancel anytime.

Interpretation

At Eindhoven Airport, for ECRA operations, pilots of Mode S aircraft with ADS‑B must: select AUTO and assigned Mode A code, or if AUTO unavailable select ON (e.g., XPDR) and the assigned Mode A code, starting from the request for push-back or taxi (whichever is earlier) and keep it selected continuously until the aircraft is fully parked in its stand; once fully parked, select STBY. If capable, enter the aircraft identification (flight callsign) in ICAO format via FMS or transponder at the time of the request for push-back or taxi. To avoid impacting SSR-based systems, do not select TCAS before clearance to line up and deselect TCAS after vacating the runway.

Map Visualization

No map data available

Loading map data

Please wait...

Raw NOTAM

A0574/26 NOTAMR A2892/25
Q) EHAA/QCBXX/IV/BO /AE/000/999/5127N00522E005
A) EHEH B) 2603031005 C) 2606031200 EST
E) ADS-B DATA FOR ECRA (EUROPEAN CONNECTED REGIONAL AIRPORTS
PROGRAMME) OPERATIONS. 1.1.IN ORDER TO COOPERATE WITH ADS-B RECEIVER
USED BY AIRPORT OPERATOR AND EUROCONTROL FOR USE OF THE ECRA
PROGRAMME AT EINDHOVEN AIRPORT,PILOTS OF MODE S EQUIPPED ACFT WITH
ADS-B FUNCTIONALITIES WHEN OPERATING ON THE GROUND SHALL: A)SELECT
AUTO MODE AND THE ASSIGNED MODE A CODE OR B)IF AUTOMODE IS NOT
AVAILABLE, SELECT ON (E.G.XPDR) AND THE ASSIGNED MODE A CODE. -FROM
THE REQUEST FOR TOWER PUSH-BACK OR TAXI,WHICHEVER IS EARLIER -AFTER
LANDING,CONTINUOUSLY UNTIL THE ACFT IS FULLY PARKED IN ITS STAND.
-WHEN THE ACFT IS FULLY PARKED, FLT CREW SHALL SELECT STBY.
1.1.2.WHENEVER THE ACFT IS CAPABLE OF REPORTING ACFT IDENTIFICATION
(I.E.CALLSIGN USED IN FLT), THIS SHOULD BE ENTERED (THROUGH THE FMS
OR THE TRANSPONDER CONTROL PANEL) AT THE TIME OF THE REQUEST FOR
TOWED PUSH-BACK OR TAXI, WHICHEVER IS EARLIER. 1.1.3.AIR CREW MUST
USE THE ICAO DEFINED FORMAT TO ENTER THE ACFT IDENTIFICATION.
1.1.4.TO ENSURE THAT THE PERFORMANCE OF SYSTEMS BASED ON SSR FREQ
(INCLUDING AIRBORNE TCAS AND SSR RADARS) IS NOT COMPROMISED, TCAS
SHOULD NOT BE SELECTED BEFORE RECEIVING CLEARANCE TO LINE UP, AND
SHOULD BE DESELECTED AFTER VACATING THE RWY.

Was this helpful?